Deep hole machining of fused quartz
Difficulties:
High material strength, quick tool wear, hard removement of chips, traditional technical is easy to appear taper hole.
Value:
Graphite mold machining
Characteristic:
Graphite is high strength and brittleness material
Difficulties:
Poor cutting performance. Hard to guarantee the quality of machined surface, especially the edge chipping defects in machining
Value:
Zirconia mobile phone back cover processing
Characteristic:
The Moh’s hardness of the material is 8.5
Difficulties:
The material has high hardness and toughness. The conventional processing method is hard to process, and the tool wear is high. The hole diameter is small, so chip removal is difficult.
Value:
Deep excavation of zirconia ceramics
Characteristic:
Material Mohs hardness is 8.5
Difficulties:
The material has high hardness and toughness. The conventional processing method is hard to process, and the tool wear is high. Chip removal is difficult.
Value:
Alumina PCB processing
Characteristic:
Rockwell hardness of material ≥ 80hra
Difficulties:
High hardness and strength of the material. Chip is easy to stick to the tool, quick wear of the tool, many burrs on the end face of conventional machining
Value:
Carbon composite / Carbon fiber machining
Characteristic:
Carbon composite materials and carbon fibers are important materials in aerospace and other industrial fields due to their excellent properties such as high strength, low density, ultra-high temperature resistance and corrosion resistance
Difficulties:
High strength and elastic modulus of material. Excellent friction and wear resistance, hard to cut, easy to collapse edge, hairy thorn, quick tool wear, easy to stick to the tool.
Value:
Titanium alloy processing
Characteristic:
High material strength, easy to stick knife.
Difficulty:
The material is easy to stick to the knife, which leads to the decline of the service life of the knife and easy to break the edge.
Value:
Ultrasonic machining video
Application fields
3C
Aerospace
5G new materials
New energy